We have a full line of Vinyl Graphics, for your cornhole boards and everything else– autos, trucks, laptops, you name it! We build your wraps with longevity in mind! We know your cornhole boards will be outside, so we start with UV resistant outdoor-use vinyl. Then we print your image in UV resistant Eco-Solvent inks. You can expect your vinyl to withstand the sun and weather for a good 5-7 years. We also build our wraps with the DIY installer in mind. Our vinyl has 3M’s Air Release Technology, which gives you an easy bubble-free install. Though we recommend recruiting the help of a friend for the install, just for an extra set of hands, the install is quick and easy with our easy-to-follow instructions. We print your cornhole board wraps slightly larger to ensure a good fit. Each piece measures 48.5″ high x 24.5″ wide. The excess can be trimmed with a razor or folded down on the sides of the board. We print your cornhole boards when you place your order so please allow us 48 hours to ship. Your order will be sent with tracking and we will upload the tracking number for you after it has shipped. If you have any questions, please feel free to contact us here on Amazon and we will usually get to your email within 12 hours. Please note: these cornhole board wraps will not adhere as well if placed directly on bare wood or MDF. The boards need to be coated with glossy paint or clear coat before applying the vinyl wraps. Please also note: We do not cut out the holes before shipping. As there is no way for us to know where exactly you may have placed the hole, we ship a solid piece so you can trim the hole in the correct place. It can easily be trimmed with a sharp razor.